Bolid S2000-2 Uživatelský manuál

Orion ISSKEYPADS2000-KUser’s Manual

Orion ISSwww.bolid.com 10

S2000-К Operating11 www.bolid.comOPERATING

Orion ISSwww.bolid.com 12INDICATIONS2000-К indication is realized by means of the LCD, the LED indicator, and the audible sounder(beeper).The S2000-К

S2000-К Operating13 www.bolid.comACCESS REQUESTSWhen the S2000-К keypad is used in an access control system, to request access into protectedpremises

Orion ISSwww.bolid.com 14Request with the Rights to Access through Several DoorsSwitch the S2000-К, if necessary, into the Time Display mode (seeabove

S2000-К Operating15 www.bolid.comARMING AND DISARMINGIf the S2000-К keypad is used in a fire and intruder alarm Orion system for authorized arming and

Orion ISSwww.bolid.com 16Arming and disarming are executed when the S2000-K is in the current time display mode, which canbe reached, if necessary, by

S2000-К Operating17 www.bolid.comUsing the t and u buttons, it is possible to review if there areother non-armed zones in the partition.To return the

Orion ISSwww.bolid.com 18REVIEWING SYSTEM EVENTS AND PROCESSING ALARMSThe Event Display mode and the Indicate Alarms mode (for the messages received f

S2000-К Operating19 www.bolid.comTo confirm receiving of an alarm message, press the ENTER button. After that the alarm is consid-ered to be accepted,

This User’s Manual is intended to help for studying operability principles and maintenance of theS2000-K Keypad of versions 1.04 and above.Please read

Orion ISSwww.bolid.com 20KEYPAD OPERATIONS SUMMARYRequesting AccessSwitch the S2000-K display to the Time Display mode (if necessary)CLEARType your pa

S2000-К Operating21 www.bolid.comTRANSMITTING S2000-K EVENTS TO THE NETWORK CONTROLLERThe S2000-K keypad automatically transmits the network controlle

Orion ISSwww.bolid.com 22

S2000-К Installation23 www.bolid.comINSTALLATION

Orion ISSwww.bolid.com 24There are no potential hazard electrical circuits within the S2000-К.Do SHUT OFF the keypad power before wiring and maintaini

S2000-К Installation25 www.bolid.comWIRINGMount and wire the S2000-К as shown in Figure 2. Wires are connected to the S2000-K by means ofthe screw ter

Orion ISSwww.bolid.com 26GETTING STARTEDAfter mounting and wiring the S2000-K, turn its power on. The keypad LCD shall backlight, the key-pad sounder

S2000-К Programming27 www.bolid.comPROGRAMMING

Orion ISSwww.bolid.com 28After installing the S2000-K, set keypad configuration parameters and modify the network controllerdatabase in order to use t

S2000-К Programming29 www.bolid.comTo reach the S2000-K settings you can also read the keypad configuration from a data storage deviceusing the File ®

S2000-К3 www.bolid.comTable of ContentsFeatures and Design...

Orion ISSwww.bolid.com 30The specified address of the S2000-К can be unset to its factory value (127). To do this, remove thekeypad top cover and pres

S2000-К Programming31 www.bolid.comNETWORK CONTROLLER SETTINGSThe network controller can be programmed either by means of the PProg Console Configurat

Orion ISSwww.bolid.com 32Figure 4Also, you can add the S2000-K descriptor to the console database by means of the tool from theDevices window toolbar

S2000-К Programming33 www.bolid.comcontrol command. The procedures of programming user rights are common and out of the scope ofthis Manual.If the S20

Orion ISSwww.bolid.com 34To assign the S2000-K keypad to the list of partitions provided that users will be authorized via enter-ing their PIN codes d

S2000-К Programming35 www.bolid.comFor the PProg, use the following procedure.1. Select the Partitions tab by pressing on the Page Icon Toolbar, or br

Orion ISSwww.bolid.com 36Figure 8Figure 9

S2000-К Programming37 www.bolid.com2. Specify the keypad as the device the events in the selected partitions will be translated to. For do-ing so, go

Orion ISSwww.bolid.com 383. The keypad descriptor being selected in the Event Translation window, define in the Inspectorwindow the kinds of events w

S2000-К Programming39 www.bolid.com4. Switch the bottom window of the page to the partition display mode by clicking (see Figure 12)or selecting the

Orion ISSwww.bolid.com 4

Orion ISSwww.bolid.com 405. Drag and drop the partitions which events will be displayed by the keypad from the Partitions win-dow on the keypad descri

S2000-К Maintenance41 www.bolid.comMAINTENANCE

Orion ISSwww.bolid.com 42TROUBLESHOOTINGs After the S2000-K is turned on, itsdisplay shows nothingMake sure that power is applied to the power termina

S2000-К Maintenance41 www.bolid.comINSPECTIONOnce per a year personnel of the Service Company shall perform a scheduled inspection of theS2000-K in or

Orion ISSwww.bolid.com 42S2000-K Testing ProcedureFor testing operability of the S2000-K, wire the keypad as shown in Figure 14. Two resistors of 220

S2000-К9 www.bolid.comAppendixSystem Events Displayed by the Keypad LCD

Orion ISSwww.bolid.com 42Partition ArmedARM 7 U 80Thepartition #7 has just been armed in response topresenting user authenticator #80Partition

S2000-К41 www.bolid.comUser’s CodeEnteredECOD 80 D007A user has presentedto a reader of the device withthe network address 7 the authenticato

BOLID ONE YEAR LIMITED WARRANTYBolid Company and its divisions and subsidiaries («Seller»), 4 Pionerskaya Str., Korolev 141070, Moscow Re-gion, Russia

S2000-К Features and Design5 www.bolid.comFEATURES AND DESIGN

4 Pionerskaya Str., Korolev 141070,Moscow Region, RussiaPhone/fax: +7 495 775-71-55Email: [email protected], [email protected]

Orion ISSwww.bolid.com 6The S2000-K keypad is designed to operate as the part of an Orion Integrated Security System (ISS)which enables users to be au

S2000-К Features and Design7 www.bolid.comsign does not provide usage in presence of aggressive media, dust, and also in fire-hazardous spac-es.The S2

Orion ISSwww.bolid.com 8

S2000-К Specifications9 www.bolid.comSPECIFICATIONSØ 16 backlit buttonsØ 16-character backlit LCDØ Non-volatile event log for storing last 255 receive