Bolid Signal-10 Uživatelský manuál stáhnout pdf (Strana 60)

Orion ISS

STANDARD DELIVERY

Find the following when unpacking the Signal-10 device:

¾ Signal-10 Intrusion and Fire Alarm Panel

¾ Information Disk

¾ 4.7 kOhm Terminating Resistors (10)

¾ Woodscrews (3)

¾ Wall Plugs (3)

¾ DIN 7982 Flat Head Tapping Screw with Cross Drive 2,2х6,5

NOTE: Readers such as Schityvatel-3 or similar and DS1990A iButtons are not supplied with

the Signal-10 and should be ordered separately.

SAFETY PRECAUTIONS

There are no potential hazard circuits within the Signal-10

Do SHUT OFF the device power before mounting, wiring, or maintaining the

Signal-10

Mounting and maintenance the device must be implemented by qualified engineers

SIGNAL-10 MOUNTING

Figure 2 shows the view of the Signal-10 along with its overall and mounting dimensions.

The device can be installed in boxes, on walls and other constructions in premises which are protect-

ed against atmospheric fallouts and mechanical damage. Being installed in insecure premises, the

device must be attached at a height of at least 2.2 m above the floor.

Mount the device in accordance with the Signal-10 connection diagram shown in Figure 3.

www.bolid.com 60

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 95 96

Žádné komentáře

Bolid Signal-10 Uživatelský manuál Strana 60